Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 918

Adhesive
tape
Backing
paper
EXTERIOR –
Moulding and Garnish
4. Remove the strip paper from the pressure sensitive
double-side tape.
NOTE
Affix double-sided tape to the end of strip paper for ease
of strip paper removal.
5. Remove strip paper from the pressure sensitive
double-side tape.
NOTE
If it is hard to affix the double-side tape in winter, heat the
application surfaces at both the vehicle body and the side
protector moulding.
Body 40–60_C
Side protect moulding 20–30_C
Apply pressure fully to the side protector moulding.
BAROOF DRIP MOULDING INSTALLATION
1. Install the clips to the clip installation bosses on the roof.
2. Install the roof moulding with the clips.
51-9