Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 974

<Driver's side>
Inflator case
<Front passenger's side>
Connector
Air bag module
deployment section
Protective tubes
Protective tubes
SRS –
Post-collision Diagnosis
SRS-ECU
1. Check SRS-ECU case and brackets for dents, cracks or
SRS-ECU
2. Check
Air bag modules
Connector
1. Check cover for dents, cracks or deformation.
2. Check connector for damage, terminals deformities, and
3. Check air bag inflator case for dents, cracks or deformities.
4. Install air bag module to steering wheel to check fit or
Cover
Inflator case
Front seat back assembly (Side air bag module)
1. Check that there is no abnormality in the seat air bag
2. Check that there is no connector damage, bent terminals
Clock spring
Case
1. Check clock spring connectors and protective tubes for
2. Visually check the case for damage.
deformation.
connector for
deformation.
harness for binds.
alignment with the wheel.
module deployment section.
or clamping of the harness.
damage, and terminals for deformation.
52B-25
damage, and terminals for