Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 883

42-40
Window Switch
lock l k position iti
switch switch
Normal UP
AUTO UP
DOWN
AUTO
DOWN
LOCK UP
AUTO UP
DOWN
AUTO
DOWN
BODY – BODY –
6. After installing the power window motor assembly to the
1. Provisionally secure the door window glass to the window
2. After raising the door window glass as far as it will go,
NOTE
Fully raising the door window glass will set the door limit switch
to the correct position.
INSPECTION
POWER WINDOW MAIN SWITCH CHECK
1. Operate the switch, and check the continuity between
Terminal No.
Front (L.H.) Front (R.H.)
1 5 14 15 2
2. Apply battery voltage to terminal 10, and connect terminal
Door Door
(3) Return the drum to its original position while holding
the wires to make sure that they do not pull out.
window regulator assembly, cut and remove the wires
which are compressing the springs.
BA DOOR WINDOW GRASS INSTALLATION
regulator assembly.
fully secure the door window glass to the window regulator
assembly.
terminals.
Rear (L.H.)
6 14 16 3
12 to earth.
Rear (R.H.)
7 14 17 4 8
42900160032
14 18