Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 314

Set pin
Camshaft sprocket
Timing mark
Crankshaft sprocket
Timing
mark
Double clip
Timing
mark
Timing
mark
ENGINE <4G9> –
4. Once the holes are aligned, insert the set pin.
5. Install the auto tensioner to the engine.
BA TIMING BELT INSTALLATION
Timing mark
1. Align the timing marks of each camshaft sprocket and
2. Loosen the tensioner pulley center bolt.
3. Move the crankshaft sprocket half a tooth width in the
4. Place the timing belt on the exhaust-side camshaft
5. Place the timing belt on the intake-side sprocket while
Timing Belt
NOTE
When replacing the auto tensioner with a new part, the
pin will be in the auto tensioner.
the crankshaft sprocket.
anti-clockwise direction.
sprocket, and hold it in the position shown in the illustration
with a double clip.
using two wrenches to align the timing marks.
11A-31