Power Window Safety Mechanism Check; Door Outside Handle Play Check; Door Inside Handle Play Check; Power Window Initial Setting - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

A
A
A
BODY –

POWER WINDOW SAFETY MECHANISM CHECK

1. Place a wooden board with a thickness of approximately
10 mm as shown in the illustration and then close the
window glass.
2. Check that the window glass lowers by a distance of
approximately 150 mm when the window clamps the
wooden
"Troubleshooting" (P.42-18).

DOOR OUTSIDE HANDLE PLAY CHECK

Section A – A
1. Check that the door outside handle play is within the
standard value range.
Standard value (B):
B
2. If the door outside handle play is not within the standard
value range, check the door outside handle or the door
latch assembly. Replace, if necessary.

DOOR INSIDE HANDLE PLAY CHECK

1. Check that the door inside handle play is within the standard
value range.
Standard value (A):
2. If the door inside handle play in not within the standard
value range, check the door inside handle or the door
latch assembly. Replace, if necessary.

POWER WINDOW INITIAL SETTING

For all doors, after fully raising the window glass, continuously
push the power window switch to the UP side for 0.5 second
or more.
Door
board. If this
FRONT DOOR 3.6 – 5.4 mm
REAR DOOR 2.2 – 5.4 mm
FRONT DOOR 18.4 – 26.8 mm
REAR DOOR 15.3 – 19.5 mm
42-31
42900100065
doesn't happen, refer to
42300160034
42300150031
42900200017