Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 3

WARNING!
(1) Improper service or maintenance of any component of the SRS and seat belt with pre-tensioner,
or any SRS-related component, can lead to personal injury or death to service personnel (from
inadvertent firing of the air bag and seat belt with pre-tensioner) or to the driver and passenger
(from rendering the SRS inoperative).
(2) SRS components and seat belt with pre-tensioner should not be subjected to heat, so remove
the SRS-ECU, air bag module, clock spring and seat belt with pre-tensioner before drying or
baking the vehicle after painting.
SRS-ECU, air bag module, clock spring and side impact sensor: 93 C or more
Seat belt with pre-tensioner: 90 C or more
(3) Service or maintenance of any SRS component and seat belt with pre-tensioner or SRS-related
component must be performed only at an authorized MITSUBISHI dealer.
(4) MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP
52B – Supplemental Restraint System (SRS), before beginning any service or maintenance of
any component of the SRS and seat belt with pre-tensioner or any SRS-related component.
NOTE
Section titles with asterisks (*) in the table of contents in each group indicate operations requiring warnings.