Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 916

Adhesive tape: double-sided tape [12 mm wide and 0.8 mm thick]
MB990449
Masking tape
EXTERIOR –
Moulding and Garnish
REMOVAL SERVICE POINT
AA
ROOF DRIP MOULDING REMOVAL
Use the special tool to lever out the moulding.
Caution
If the moulding has become warped, it should not be
reused.
AB
SIDE PROTECTOR MOULDING REMOVAL
1. Attach protection tape all the way along the edges of the
double-sided tape which is still adhering to the body.
51-7