Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 784

MB990520
BASIC BRAKE SYSTEMS –
2. After installing the caliper support to the knuckle, install
3. Clean piston and insert into cylinder with special tool.
4. Be careful that the piston boot does not become caught,
5. Check brake drag torque as follows.
6. Check hub torque (B) with spring balance.
7. Calculate the drag torque of the disc brake [difference
8. If the difference between brake drag torque and hub torque
Front Disc Brake
the pad clips and the pads to the caliper support.
Caution
Do not let any oil, grease or other contamination get
onto the friction surfaces of the pads and brake discs.
when lowering the caliper assembly and install the lock
pin.
(1) Start the engine and then depress the brake pedal
2-3 times.
(2) Stop engine.
(3) Turn brake disc forward 10 times.
between hub torque (B) and hub torque (A)].
Standard value: 40 N or less
exceeds the standard value, replace the disc brake
assembly.
35A-21