KEYLESS ENTRY RECEIVER-ECU
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Lower Panel (Passenger's side) Removal and
Installation (Refer to GROUP 52A.)
Removal steps
1. Harness connector
2. Keyless entry receiver bracket
3. Keyless entry receiver-ECU
4. ECU bracket
BODY –
Keyless Entry System
When 1 minute has passed after registration mode
started;
If the MUT-II is disconnected (the earth connection
is broken);
If the ignition switch is turned to ON;
If any of the doors are opened;
8. After registration mode has been completed, carry out
the followings to make sure that the keyless entry system
operates.
Pull the ignition key out.
Close the all windows.
3
1
42-57
42800130016
4
2