Diagnosis Function - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

GENERAL –
4. INSPECTION CHART FOR DIAGNOSIS CODES
5. INSPECTION PROCEDURE FOR DIAGNOSIS CODES
Indicates the inspection procedures corresponding to each diagnosis code. (Refer to the next page
for how to read the inspection procedures.)
6. INSPECTION CHART FOR TROUBLE SYMPTOMS
If there are trouble symptoms even though the results of inspection using the MUT-II show that all
diagnosis codes are normal, inspection procedures for each trouble symptom will be found by means
of this chart.
7. INSPECTION PROCEDURE FOR DIAGNOSIS SYMPTOM
Indicates the inspection procedures corresponding to each trouble symptoms classified in the Inspection
Chart for Trouble Symptoms. (Refer to the next page for how to read the inspection procedures.)
8. SERVICE DATA REFERENCE TABLE
Inspection items and normal judgement values have been provided in this chart as reference information.
9. CHECK AT ECU TERMINALS
Terminal numbers for the ECU connectors, inspection items and standard values have been provided
in this chart as reference information.
10. INSPECTION PROCEDURES USING AN OSCILLOSCOPE
When there are inspection procedures using an oscilloscope, these are listed here.
How to Use Troubleshooting/Inspection Service Points

DIAGNOSIS FUNCTION

1.
When using the MUT-II
Connect the MUT-II to the diagnosis connector and take
a reading of the diagnosis codes.
Caution
Connection and disconnection of the MUT-II should
always be carried out with the ignition switch in the
LOCK (OFF) position.
METHOD OF READING DIAGNOSIS CODES
00-7