Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 810

WHEEL CYLINDER ASSEMBLY
DISASSEMBLY AND REASSEMBLY
1
7
2
Brake fluid: DOT3 or DOT4
Disassembly steps
1. Boots
2. Piston assembly
AA 3. Pistons
AA 4. Piston cups
MB991008
Have the lip facing
upwards.
ABS <2WD> –
6
7 Nm
7
3 4
2
2
Grease: Repair kit grease
REASSEMBLY SERVICE POINT
1. Use alcohol or specified brake fluid to clean the wheel
2. Apply the specified brake fluid to the piston cups and
3. Set the piston cup on the special tool with the lip of the
Piston
Rear Drum Brake
2
4
5
Wheel cylinder repair kit
5. Spring
6. Bleeder
7. Wheel cylinder body
AA PISTON CUP/PISTON REASSEMBLY
cylinder and the piston.
the special tool.
Specified brake fluid: DOT3 or DOT4
cup facing up, fit the cup onto the special tool, and then
slide it down the outside of the tool into the piston groove.
Caution
In order to keep the piston cup from becoming twisted
or slanted, slide the piston cup down the tool slowly
and carefully, without stopping.
1
3
4
1 4
1
Grease
35B-21