33A-8
DISASSEMBLY AND REASSEMBLY
Disassembly steps
AA
AA 1. Self-locking nut
2. Strut insulator
3. Spring seat, upper
4. Spring pad, upper
MB991238
MB991682
FRONT SUSPENSION –
6
7
8
DISASSEMBLY SERVICE POINTS
AA
1. Use the special tools to compress the coil spring.
MB991237
2. Use the special tools to remove the self-locking nut.
MB991681
Strut Assembly
5. Bump rubber
6. Coil spring
7. Spring pad, lower
AB
8. Strut assembly
SELF-LOCKING NUT REMOVAL
Caution
(1) To compress the coil spring fully, install the special
tools evenly, and so that the space between both
arms of the special tool will be maximum within
the installation range.
(2) Do not use an impact wrench to tighten the special
tool bolt, otherwise the special tool will break.
Caution
Do not use an impact wrench, otherwise the strut
assembly internal parts will loose.
33200130115
1
59 – 69 Nm
2
3
4
5