Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 720

Speed sensor
ABS rotor
Thickness
gauge
REAR AXLE –
Rear Axle Hub
INSTALLATION SERVICE POINT
AA REAR HUB ASSEMBLY INSTALLATION <VEHICLES
WITH ABS>
Caution
Be careful that the speed sensor and the ABS rotor teeth
do not become damaged by striking them against the
metal parts.
Insert a thickness gauge into the space between the speed
sensor's pole piece and the ABS rotor's toothed surface, and
then tighten the speed sensor bracket at the position where
the clearance is the standard value all around.
Standard value: 0.1 – 1.9 mm
INSPECTION
D
Check the oil seal for crack or damage.
D
Check the rear hub unit bearing for wear or damage.
D
Check the ABS rotor for chipped teeth.
27-5
27100210150