Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 445

13A-86
Engine-ECU Harness Side Connector Terminal Arrangement
Terminal No. Check item
5 – 12 Purge control solenoid valve
6 – 12 Oxygen sensor heater control
13 – Body earth Earth
26 – Body earth
31 – 12 EGR valve (C)
12
32 – EGR valve (D)
39 – 12 EGR valve (A)
40 – 12 EGR valve (B)
57 – 92 Accelerator pedal position switch
72 – 53 Intake air temperature sensor
83 – 53 Engine coolant temperature sensor
GDI –
Troubleshooting
Standard value, normal condition (check require-
ments)
36 – 44 Ω (at 20 C)
11 – 18 Ω (at 20 C)
Continuity (0 Ω)
15 – 20 Ω (at 20 C)
Continuity (when the accelerator pedal is released)
No continuity (when the accelerator pedal is slightly
depressed)
5.3 – 6.7 kΩ (when intake air temperature is 0 C)
2.3 – 3.0 kΩ (when intake air temperature is 20 C)
1.0 – 1.5 kΩ (when intake air temperature is 40 C)
0.30 – 0.42 kΩ (when intake air temperature is 80 C)
5.1 – 6.5 kΩ (when engine coolant temperature is
0 C)
2.1 – 2.7 kΩ (when engine coolant temperature is
20 C)
0.9 – 1.3 kΩ (when engine coolant temperature is
40 C)
0.26 – 0.36 kΩ (when engine coolant temperature is
80 C)