Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 348

Hide thumbs Also See for Space Runner 1999:

Table of Contents

ENGINE <4G1> –

4. Align each of the camshaft sprocket and the crankshaft

5. Install the timing belt in the following order, while making

1. Initially loosen the fixing bolt of the tensioner pulley fixed

2. Turn the crankshaft in the proper rotation direction (right

3. After checking to be sure that no belt teeth in the section

sprocket timing marks.

sure that the tension side of the belt is not slackened.

(1) Crankshaft sprocket

(2) Camshaft sprocket

(3) Tensioner pulley

After installing the timing belt, apply force to turn

the camshaft sprocket in the reverse direction, and

recheck to be sure that the belt is fully tensioned and

that each timing mark is in the proper position.

BA TIMING BELT TENSION ADJUSTMENT

to the engine mount side by 1/2-1/4 turn, and use a force

of the tensioner spring to apply tension to the belt.

turn) for two rotations, and recheck to be sure that the

timing marks on each sprocket are aligned.

As the purpose of this procedure is to apply the proper

amount of tension to the tension side of the timing

belt by using the cam driving torque, turn the

crankshaft only by the amount given above. Be sure

not to turn the crankshaft in the opposite direction

(left turn).

marked with A are lifted up and that the teeth in each

sprocket are engaged, secure the tensioner pulley.

Show Quick Links

Chapters

Table of Contents