Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 746

FRONT SUSPENSION –
Outside of vehicle
Identification mark
A
Stabilizer Bar
INSTALLATION SERVICE POINTS
AA BUSHING/FIXTURE INSTALLATION
Place the identification mark of the stabilizer bar to the right,
and install the bushing so that the identification mark is at
the shown position.
BA SELF-LOCKING NUT INSTALLATION
Tighten the self-locking nut so that the amount of protrusion
of the end of the stabilizer bar mounting bolt is at the standard
value.
Standard value (A): 22 mm
INSPECTION
D
Check the bushing for wear and deterioration.
D
Check the stabilizer bar for deterioration or damage.
33A-13
33200200021