34-10
Press-fitting
REAR SUSPENSION –
REMOVAL SERVICE POINTS
AA
AB
AC
Axis
MB991444
MB991445
MB991446
Trailing Arm
LIFTING POINT
When removing the trailing arm, move the lifting arm slightly
towards the front of the vehicle so that it will not be in
the way.
REAR SPEED SENSOR REMOVAL
Caution
Do not strike the speed sensor against other parts
when removing it. Otherwise the speed sensor will
be damaged.
LOWER ARM AND TRAILING ARM DISCONNECTION
1. After supporting the lower arm with a jack, separate
the lower arm and trailing arm connection.
2. Set the installation direction and installation location
of the trailing arm bushing.
(1) Place the long projecting end of the trailing arm
bushing inner pipe towards the inside of the
vehicle.
(2) Set so that the trailing arm bushing is symmetrical
to the axis between the centre of the trailing arm
bushing and the centre of the spindle.
3. Use the special tools to press-fit the trailing arm
bushing.