Throttle Valve Controller - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

13A-121
GDI –
Injector Driver/Throttle Valve Controller
AB
INJECTOR DRIVER REMOVAL
Caution
The injector driver will become hot after the vehicle has
been driven, so take care when handling it.

THROTTLE VALVE CONTROLLER

INSTALLATION SERVICE POINT
If the throttle valve controller is replaced, initialize the
electronic-controlled throttle valve system.
Initialization
Turn on the ignition switch, and turn off it within one second.
Throttle valve controller
Then leave it for at least ten seconds with the ignition switch
off.