31-4
WHEEL AND TYRE –
On-vehicle Service/Wheel and Tyre
ON-VEHICLE SERVICE
TYRE INFLATION PRESSURE CHECK
Check the inflation pressure of the tyres. If it is not within
the standard value, make the necessary adjustment.
TYRE WEAR CHECK
Measure the tread depth of tyres.
Limit: 1.6 mm
If the remaining tread depth is less than the limit, replace
the tyre.
NOTE
When the tread depth of tyres is reduced to 1.6 mm or less,
wear indicators will appear.
WHEEL RUNOUT CHECK
Jack up the vehicle so that the wheels are clear of the floor.
While slowly turning the wheel, measure wheel runout with
Radial
a dial indicator.
Limit:
Lateral
If wheel runout exceeds the limit, replace the wheel.
WHEEL AND TYRE
INSTALLATION SERVICE POINT
Tighten the wheel nut to the specified torque.
Tightening torque: 98–117 Nm
Item
Radial runout mm
Lateral runout mm
Steel wheel
Aluminium wheel
1.2
1.0
1.2
1.0
31100090034
31100100034
31100110037
31100130033