Number
MD135737
MD136466
MD322508
MD325714 and MD332687
ENGINE LUBRICATION –
6. Apply a small amount of engine oil to the O-ring of a
7. Once the O–ring of the oil filter is touching the flange,
8. Install the drain plug and refill the engine oil. (Refer to
9. Race the engine 2–3 times, and check to be sure that
O-ring
Tool
MB991396 or equivalent tool
MB991610 or equivalent tool
Commercially–available tool
On-vehicle Service
new oil filter.
use the respective tool in the following table to tighten
the oil filter to the specified torque.
Engine Oil Replacement in P.12-4.)
no engine oil leaks from installation section of the oil filter.
Tightening torque
Approx. 1 turn (14 Nm)
Approx. 3/4 turn (17 Nm)
Approx. 3/4 turn (16 Nm)
12-5