Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 627

Hide thumbs Also See for Space Runner 1999:

Table of Contents

ENGINE ELECTRICAL –

DISASSEMBLY SERVICE POINTS

1. Using an appropriate wrench socket, push the stop ring

2. Remove the snap ring with snap ring pliers and then remove

Snap ring pliers

STARTER MOTOR PARTS CLEANING

1. Do not immerse the parts in cleaning solvent. Immersing

2. Do not immerse the drive unit in cleaning solvent. The

3. The drive unit may be cleaned with a brush moistened

Starting System

MAGNETIC SWITCH REMOVAL

Disconnect the field coil wire from terminal M of the

magnetic switch.

ARMATURE AND BALL REMOVAL

When removing the armature, do not lose the ball placed

at the end as a bearing.

SNAP RING/STOP RING REMOVAL

toward the overrunning clutch.

the stop ring and overrunning clutch.

the yoke and field coil assembly and/or armature will

damage insulation. Wipe these parts with a cloth only.

overrunning clutch is pre-lubricated at the factory and

solvent will wash lubrication from clutch.

with cleaning solvent and wiped dry with a cloth.

Show Quick Links

Chapters

Table of Contents