Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 114

Hide thumbs Also See for Space Runner 1999:
Table of Contents

Advertisement

INSPECTION PROCEDURE 26
Engine-ECU <M/T> or Engine-A/T-ECU <A/T> power
supply and earth circuit system
The engine-ECU <M/T> or engine-A/T-ECU <A/T> may be defective, or that one
of the malfunctions listed at right has occured.
Measure at the engine-ECU connector B-51, B-53, B-54
<M/T> or the engine-A/T-ECU connector B-111, B-112 <A/T>.
D Disconnect the connector and measure at the harness side
(1) Voltage between 82 <M/T>, 98 <A/T> and earth (Ignition
switch: ON)
OK: System voltage
(2) Voltage between 38 <M/T>, 49 <A/T> and earth
OK: System voltage
(3) Voltage between <M/T> 12, 45 <A/T> 41, 47 and earth
(Ignition switch: ON)
OK: System voltagem (when the terminal 38 <M/T>, 49 <A/T>
is earthed)
(4) Continuity between <M/T> 13, 26 <A/T> 42, 48 and earth
OK: Continuity
(5) Voltage between 80 <M/T>, 66 <A/T> and earth
OK: System voltage
OK
NG
Check the following
connector: <M/T>B-51,
B-53, B-54 <A/T>
B-111, B-112
OK
Check trouble symptom.
NG
Replace the engine-ECU <M/T> or engine-A/T-ECU <A/T>
MPI -
Troubleshooting
(1) NG
(2,3) NG
(4) NG
(5) NG
Repair
Probable cause
D Improper
connector
short-circuited harness wire in the engine-ECU <M/T>
or engine-A/T-ECU <A/T> power supply circuit.
D Open circuit or short-circuited harness wire in the
engine-ECU <M/T> or engine-A/T-ECU <A/T> earth
circuit
D Malfunction
of
engine-A/T-ECU <A/T>
NG
Check
the
following
connector: B-13, B-89,
B-103
OK
Check trouble symptom.
OK
NG
Check the harness wire
between engine-ECU
<M/T> or engine-
A/T-ECU <A/T> and
ignition switch
connector.
OK
Check the ignition switch. (Refer to GROUP 54-Ignition
Switch.)
Check the harness wire between engine-ECU <M/T> or engine-
A/T-ECU <A/T> and control relay connector, and repair if necessary.
Check the harness wire between engine-ECU <M/T> or engine-
A/T-ECU <A/T> and earth, and repair if necessary..
NG
Check
the
following
connector: B-14, B-44,
B-66, B-90, B-103
OK
Check trouble symptom.
NG
Check the harness wire between engine-ECU <M/T> or
engine-A/T-ECU <A/T> and battery, and repair if necessary.
13D-49
contact,
open
circuit
the
engine-ECU
<M/T>
Repair
Repair
Repair
or
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents