Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 813

35B-24
WHEEL SPEED SENSOR
REMOVAL AND INSTALLATION
Post-installation Operation
D
Wheel Speed Sensor Output Voltage Check
(Refer to P.35B-16.)
<Front>
1
2
Front speed sensor removal steps
AA
1. Front speed sensor
2. Front ABS rotor
(Refer to GROUP 26 – Drive
shaft.)
Rear speed sensor removal steps
3. Rear ABS rotor
(Refer to GROUP 27 – Rear Axle
Hub.)
AA
AA 4. Rear speed sensor
Pole piece
ABS <2WD> –
Wheel Speed Sensor
<Rear>
25 Nm
25 Nm
REMOVAL SERVICE POINT
AA
FRONT SPEED SENSOR/REAR SPEED SENSOR
REMOVAL
Caution
Be careful when handling the pole piece at the tip of the
speed sensor and the toothed edge of the ABS rotor so
as not to damage them by striking against other parts.
14 Nm
4
65 Nm
NOTE
The front ABS rotor is integrated with the drive shaft and
is not disassembled.
3