Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 855

42-12
10 mm
15 mm
BODY –
Window Glass
5. Fill a sealant gun with adhesive. Then apply the adhesive
evenly around the windshield within 30 minutes after
applying the primer.
NOTE
Cut the tip of the sealant gun nozzle into a V shape to
simplify adhesive application.
6. Align the mating marks on the glass and the body, and
lightly press the windshield glass evenly so that it adheres
completely.
7. Use a spatula or the like to remove any excessive adhesive.
Then clean the surface with isopropyl alcohol. Try not
to move the vehicle until the adhesive sets.
8. Wait 30 minutes or more, and then test for water leakage.
Caution
(1) Do not move the vehicle unless absolutely
necessary.
(2) When testing for water leakage, do not pinch the
end of the hose to spray the water.