22-10
MANUAL TRANSMISSION –
INSTALLATION SERVICE POINTS
Shift lever
1. Set the transmission side shift lever and the passenger
Neutral position
2. For the transmission side, face the white and yellow paint
3. For the passenger compartment side, face the flange
4. Move the shift lever to all positions and check that the
Transmission Control <F5M42>
AA SHIFT CABLE AND SELECT CABLE ASSEMBLY/
SHIFT CABLE CONNECTION/SELECT CABLE
CONNECTION
compartment side shift lever to the neutral position.
marks on the shift and select cable ends to the snap pins,
and install the cables.
surface of the resin bushing on the select cable end to
the split pin, and install the cable.
operation is smooth.