11B-20
MD998781
MD998718
Crankshaft
MD998304
MD998305
Oil seal
ENGINE <4G1> –
REMOVAL SERVICE POINT
AA
Use the special tool to secure the flywheel, and remove the
bolts.
INSTALLATION SERVICE POINTS
AA CRANKSHAFT REAR OIL SEAL INSTALLATION
1. Apply a small mount of engine oil to the entire
circumference of the oil seal lip.
2. Install the oil seal by tapping it as shown in the illustration.
BA FLYWHEEL/ADAPTER PLATE INSTALLATION
Use the special tool to hold the flywheel in the same manner
as removal, and install the bolts.
CA CRANKSHAFT FRONT OIL SEAL INSTALLATION
1. Apply a small amount of engine oil to the entire
circumference of the oil seal lip.
2. Tap the oil seal unit it flushes with the oil seal case.
Crankshaft Oil Seals
ADAPTER PLATE/FLYWHEEL REMOVAL