Starting System; General Information - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

STARTING SYSTEM

GENERAL INFORMATION

If the ignition switch is turned to the "START"
position, current flows in the pull-in and holding coils
provided inside magnetic switch, attracting the
plunger. When the plunger is attracted, the lever
connected to the plunger is actuated to engage
the starter clutch.
On the other hand, attracting the plunger will turn
on the magnetic switch, allowing the B terminal and
SYSTEM DIAGRAM
STARTER MOTOR SPECIFICATIONS
Items
Type
Rated output kW/V
No. of pinion teeth
ENGINE ELECTRICAL –
Ignition
switch
Battery
Brush
GDI
Reduction drive with planetary gear
1.2/12
8
Starting System
M terminal to conduct. Thus, current flows to engage
the starter motor.
When the ignition switch is returned to the "ON"
position after starting the engine, the starter clutch
is disengaged from the ring gear.
An overrunning clutch is provided between the pinion
and the armature shaft, to prevent damage to the
starter.
Plunger
Holding coil
Pull-in coil
Armature
Yoke
MPI
Reduction drive with planetary gear
0.9/12
8
16-23
16200010290
Lever
Over-running
clutch
Pinion shaft