11B-14
CRANKSHAFT PULLEY
REMOVAL AND INSTALLATION
Pre-removal Operation
Under Cover (R.H.) Removal
Removal steps
1. Drive belt (Power steering and A/C)
2. Alternator connector
3. Drive belt (Alternator)
MD998747
ENGINE <4G1> –
1
3
118 – 132 Nm
REMOVAL SERVICE POINT
AA
Caution
1. Drive belt will be damaged when doing this work, so
Drive belt
2. Never reuse a damaged drive belt.
INSTALLATION SERVICE POINT
When installing the crankshaft bolt, apply the minimum amount
of engine oil to the bearing surface and thread of the bolt.
Caution
1. Drive belt will be damaged when doing this work, so
2. Never reuse a damaged drive belt.
Crankshaft Pulley
Post-installation Operation
D
Drive Belt Tension Adjustment (Refer to P.11B-5.)
D
Under Cover (R.H.) Installation
2
4
(Engine oil)
AA
AA 4. Crankshaft pulley
CRANKSHAFT PULLEY REMOVAL
do not use the drive belt installed on the engine.
AA CRANKSHAFT PULLEY INSTALLATION
do not use the drive belt installed on the engine.
11200160389