Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 160

DISASSEMBLY AND REASSEMBLY
Disassembly steps
"AA 1. Throttle position sensor
2. Idle speed control body assembly
3. O-ring
4. Throttle body
5. Fixed SAS
6. Speed adjusting screw
7. O-ring
MPI -
Throttle Body
6
1
7
4
3
2
5
NOTE
1. The fixed SAS and the speed adjusting screw are
correctly adjusted at the factory and should not be
removed.
2. If the fixed SAS should happen to have been
removed, carry out fixed SAS adjustment.
3. If the speed adjusting screw should happen to have
been removed, carry out speed adjusting screw
adjustment.
13D-95