13A-10
Engine-ECU Connector Terminal Arrangement
Terminal No.
Check items
57- 53
Accelerator pedal position switch
CHECK AT THE THROTTLE VALVE CONTROLLER TERMINALS
TERMINAL VOLTAGE CHECK CHART
Throttle Valve Controller Connector Terminal Arrangement
Terminal No.
Check items
20
Accelerator pedal
position sensor
(2nd channel)
NOTE
Check if the difference in output between *1 and *2 is 4 V or more.
GDI <4G6> -
Troubleshooting
Requirements
Ignition switch: ON
Standard value, Normal condition (Check require-
ments)
Continuity (when the accelerator pedal is
released)
No continuity (when the accelerator pedal is
slightly depressed)
Release the accelerator pedal.
Depress the accelerator pedal
fully.
Normal value
1
0.3- 1.0 V*
2
4.5- 5.5 V*