Transmission Mounting - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

32-4
POWER PLANT MOUNT –

TRANSMISSION MOUNTING

REMOVAL AND INSTALLATION
Caution
Mounting locations marked by * should be provisionally tightened, and then fully tightened when
the body is supporting the full weight of the engine.
Pre-removal and Post-installation Operation
Air Cleaner Assembly Removal and Installation
Removal steps
D Centermember mounting bolt
(Refer to P.32-5.)
MB991453
Engine
side
Arrow
Transmission
mount stopper
Transmission mount bracket
2
1
REMOVAL SERVICE POINT
MZ203827
AA
1. Install the special tool to the vehicle body to support the
engine and transmission assembly.
2. Remove the centermember mounting bolts.
3. Remove the bolt and nuts of the transmission mount
bracket.
4. After lowering the engine and transmission assembly,
remove the transmission mount bracket.
INSTALLATION SERVICE POINT
AA TRANSMISSION MOUNT STOPPER INSTALLATION
Clamp the transmission mount stopper so that the arrow points
in the direction as shown in the diagram.
Transmission Mounting
88 Nm*
49 Nm
2
AA
1. Transmission mount bracket
AA 2. Transmission mount stopper
TRANSMISSION MOUNT BRACKET REMOVAL
32100140217