Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 437

13A-78
Item Check items
No.
66 Brake vacuum
sensor
67 Stop lamp
switch
68 EGR valve
74 Fuel pressure
sensor
77 Accelerator
pedal position
sensor sensor (2nd (2nd
channel)
78 Accelerator
pedal position
sensor sensor (1st (1st
3
channel) *
GDI –
Requirements
Engine coolant Stop the engine from
temperature: 80 idling
– 95_C then
Lamps, electric brake pedal several
cooling fan and times with the ignition
all accessories: switch on.
OFF
Transmission:
Neutral
Ignition switch: ON Brake
pressed
Brake
leased
Engine coolant Idling
temperature: 80
– 95_C
Lamps, electric
cooling fan and cooling fan and
2,500 r/min
all accessories:
OFF
Transmission:
Neutral
Engine coolant Engine: Idling
temperature: 80
– 95_C
Lamps, electric
cooling fan and
all accessories:
OFF
Transmission:
Neutral
Ignition switch: ON Release the acceler-
ator pedal.
Depress the acceler-
ator pedal gradually.
Depress the acceler-
ator pedal fully.
Ignition switch: ON
Release the acceler-
ator pedal.
Depress the acceler-
ator pedal gradually.
Depress the acceler-
ator pedal fully.
Troubleshooting
Normal condition
Displayed pressure
speed, and increases.
depress the
pedal: De- OFF
pedal: Re- ON
5 – 15 STEP
0 – 5 STEP
4 – 7 MPa
400 – 900 mV
Increases
sponse to the pedal
depression stroke.
4,500 – 5,000 mV
400 – 900 mV
Increases
sponse to pedal de-
pression stroke.
4,500 – 5,000 mV
Inspection Reference
procedure page
No.
Code 13A-31
No.66
Procedure 13A-71
No.33
Procedure 13A-69
No.30
– –
Code 13A-32
No.77
in re-
Code 13A-33
No.78
in re-