Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 982

SRS warning lamp
<Driver's side>
Inflator case
<Front passenger's side>
Connector
SRS – SRS –
Air Bag Modules and Clock Spring Air Bag Modules and Clock Spring
1. Before installation of the steering wheel, be sure to first
2. After clamping, turn the steering wheel all the way in both
1. Connect the air bag module connector securely.
2. Tighten the air bag module mounting screws.
9 Nm
1. Reconnect the negative battery terminal.
2. Turn the ignition key to the "ON" position.
3. Does the "SRS" warning lamp illuminate for about 7
4. If yes, SRS system is functioning properly.
INSPECTION
Connector
AIR BAG MODULE CHECK
If any improper part is found during the following inspection,
replace the air bag module with a new one.
Dispose the old one according to the specified procedure.
(Refer to P.52B-39.)
Caution
Never attempt to measure the circuit resistance of the
air bag modules (squib) even if you are using the specified
tester. If the circuit resistance is measured with a tester,
Cover
accidental air bags deployment will result in serious
personal injury.
1. Check cover for dents, cracks or deformation.
2. Check connectors for damage, terminals for deformation,
3. Check air bag inflator case for dents, cracks or deformation.
4. Install the air bag module (driver's side) to steering wheel
Inflator case
5. Install the air bag module (front passenger's side) to the
CA STEERING WHEEL INSTALLATION
turn the vehicle's front wheels to the straight-ahead position
and align the mating marks of the clock spring.
Caution
Be sure when installing the steering wheel, that the
harness of the clock spring does not become caught
or tangled.
directions to confirm that steering is normal.
DA AIR BAG MODULE INSTALLATION (DRIVER'S
SIDE)
EA POST-INSTALLATION INSPECTION
seconds, and then remain extinguished for at least 5
seconds after turning OFF?
If no, consult page 52B-7.
and harness for binds.
to check fit or alignment with the wheel.
instrument panel and crossmember and check fit and
alignment.
52B-33
52400250290