Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 989

52B-40
SRS –
Body wiring harness
connector (2-pin)
Clock spring 2-pin
connector (red)
Body wiring
harness
connector (2-pin)
Air bag module 2-pin connector (red)
Body wiring harness
connector (2-pin)
Side air bag
module 2-pin
connector (red)
Connection
Insulation
tape
SRS air bag
adapter
harness A
MB686560
Air Bag Module and Seat Belt Pre-tensioner Disposal Procedures
3. To deploy the air bag module (driver's side):
4. To deploy the air bag module (front passenger's side):
5. To deploy the side air bag module:
6. Connect two wires, each six meters or longer, to the two
6 m or longer
Two wires
(1) Remove the steering column cover lower.
(2) Remove the connection between the clock spring 2-pin
connector (red) and the body wiring harness connector.
NOTE
If the clock spring connector is disconnected from
the body wiring harness, both electrodes of the clock
spring connector will be automatically shorted to
prevent unintended deployment of the air bag due
to static electricity, etc.
(1) Remove the glove box.
(2) Remove the connection between the air bag module
(front passenger's side) connector (red 2-pin) and the
body wiring harness connector.
NOTE
If the air bag module connector is disconnected from
the body wiring harness, both electrodes of the air
bag module connector will be automatically shorted
to prevent unintended deployment of the air bag due
to static electricity, etc.
Remove the connection between the side air bag module
connector (red 2-pin) and the body wiring harness
connector.
Caution
The side air bag modules for both the driver's side
and passenger's side should be deployed.
NOTE
If the air bag module connector is disconnected from the
body wiring harness, both electrodes of the side air bag
module connector will be automatically shorted to prevent
unintended deployment of the side air bag due to static
electricity, etc.
leads of SRS air bag adapter harness A and cover the
connections with insulation tape. The other ends of the
two wires should be
(short-circuited), to
deployment of the air bag.
connected to each
prevent sudden unexpected
other