Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 887

42-44
BODY –
Door
DOOR LOOK KEY CYLINDER SWITCH CONTINUITY
CHECK
<L.H.>
Terminal No.
Switch position
1
LOCK
Neutral (OFF)
UNLOCK
<R.H.>
Switch position Terminal No.
1
LOCK
Neutral (OFF)
UNLOCK
DOOR LOCK ECU CHECK
1. Apply battery voltage to terminal 5, and connect terminal
6 to earth.
2. Use a needle-type multimeter to measure the voltage under
the measurement conditions given below.
Measurement Terminal No.
condition diti
2
Connect terminal Needle swings at
(8) to earth. the point when ter-
minal is earthed.
Disconnect earth 0 V
from terminal (8).
Connect terminal 0 V
(3) to earth.
Connent terminal Needle swings at
(7) to earth. the point when ter-
minal is earthed.
3. Check the continuity between terminals 2, 4, 6.
42300630030
2 3
2 3
42300650029
4
0 V
Needle swings at
the point when earth
is disconnected.
Needle swings at
the point when ter-
minal is earthed.
0 V