42-22
<Rear>
Power window main switch check
(Refer to P.42-40.)
OK
Power window sub-switch check
(Refer to P.42-41.)
OK
Measure at the power window sub-
switch connector(L.H.) E-07 or (R.H.)
E-17.
Ignition switch (IG2): ON
Disconnect the connector and
measure at harness side.
Voltage between 3 and body earth
(When main switch is at UP)
Voltage between 2 and body earth
(when main switch is at DOWN)
Voltage between 1 and body earth
(when main switch is at AUTO)
Voltage between 6 and body earth
OK: System voltage
OK
Measure at the power window motor
connector(L.H.) E-08 or (R.H.) E-18.
Disconnect the connector and
measure at harness side.
Voltage between 5 and body earth
(When sub-switch is at UP)
Voltage between 4 and body earth
(When sub-switch is at DOWN)
Voltage between 2 and body earth
(When sub-switch is at AUTO)
Voltage between 6 and body earth
OK: System voltage
OK
Measure at the power window motor
connector(L.H.) E-08 or (R.H.) E-18.
Disconnect the connector and
measure at harness side.
Continuity between 1 and body earth
OK: Continuity
OK
Replace the power window regulator
assembly
BODY –
NG
Replace
NG
Replace
NG
Check the following connectors:
<L.H.> B-41, E-07, D-17, E-03, B-80,
B-77, B-45
<R.H.> B-41, D-05, E-17, E-03, B-80,
B-77, B-45
Check trouble symptom.
Check the harness between the
power window main switch and the
power window sub-switch, between
the power window main switch and
the fusible link No.6, between the
power window main switch and
ignition switch (IG2). Repair if
necessary.
NG
Check the following connectors:
<L.H.> B-45, B-61X, D-17, E-08
<R.H.> B-45, B-61X, D-05, E-18
Check trouble symptom.
Check the harness wire between power
window sub-switch and power window
motor, between fusible link No.6 and
power window motor, and repair if nec-
essary.
NG
Check the following connectors:
<L.H.> D-17, E-08
<R.H.> D-05, E-18
Check trouble symptom.
Check the harness between the power
window motor and body earth.
Repair, if necessary.
Door
NG
OK
NG
NG
OK
NG
NG
OK
NG
Repair
Repair
Repair