Bleeding - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

Setting nut
12 Nm
Clutch pedal free play
Distance between the clutch pedal and the
toeboard when the clutch is disengaged
D
CLUTCH –
2. If the height of the clutch pedal is outside the standard
Adjusting bolt
3. If the clutch pedal play is not within the standard value,
Locking
Nut
13 Nm
4. After completing the adjustments, confirm that the clutch
C
5. If the measured values do not agree with the standard
6. Turn back the carpet, etc.

BLEEDING

Specified brake fluid: DOT 3 or DOT 4
Caution
Avoid using a mixture of the specified fluid and other
fluid, otherwise the clutch fluid will deteriorate resulting
clutch fault.
On-vehicle Service
value, loosen the lock nut and adjust the pedal height
to the standard value using the adjusting bolt or push
rod.
loosen the locking nut and move the push rod to adjust.
Caution
Do not push in the master cylinder push rod at this
time, otherwise the clutch will not operate properly.
pedal free play (measured at the face of the pedal pad)
and the distance between the clutch pedal (the face of
the pedal pad) and the toeboard when the clutch is
disengaged are within the standard value ranges.
Standard value (C): 6–13 mm
Standard value (D):
50 mm <L.H. drive vehicles>
75 mm <R.H. drive vehicles>
values, it is probably the result of either air in the hydraulic
system or a faulty master cylinder or clutch. Bleed the
air, or disassemble and inspect the master cylinder or
clutch.
21-3
21100140174