Show Atmf Links Guest - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF LINKS GUEST

show atmf links guest
Overview This command displays information about guest nodes visible to an AMF device.
show atmf links guest [interface <interface-range>]
Syntax
Default With no parameters specified this command will display its standard output for all
ports with guest nodes connected.
Mode User Exec/Privileged Exec
Usage Use this command to display the guest nodes connected to a single parent node.
If you want to see a list of all the guests in the AMF network, use
Example 1 To display information about AMF guests that are connectible from node1, use the
command:
node1#
Output Figure 54-20: Example output from show atmf links guest
Table 54-1: Parameters in the output from show atmf links guest
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter
interface
<interface-range>
show atmf links guest
node1#sh atmf links guest

Guest Link Information:

DC = Discovery configuration
S = static D = dynamic

Local Guest
Port Class
---------------------------------------------------------------
1.0.1 -
1.0.2 aastra-phone
1.0.3 cisco-phone2
1.0.4 panasonic...
Parameter
Local Port
Guest Class
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Select a specific range of ports to display information about
guest nodes.
Model MAC
Type DC Address
other D 0013.1a1e.4589
other D 0008.5d10.7635
other S -
other D 0800.239e.f1fe
Description
The port on the parent node that connects to the guest.
The name of the ATMF guest-class that has been assigned
to the guest node by the
show atmf
IP / IPv6
Address
192.168.1.2
192.168.1.3
192.168.2.1
192.168.1.5
atmf guest-class command.
guests.
2383