Username - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

USERNAME

username
Overview This command enables you to assign a username to a guest class. Guests may
require a username and possibly also a password. In its non-encypted form the
password must be between 1 and 32 characters and will allow spaces. In its
encrypted form the password must be between 1 to 64 characters and will allow
any character
username <NAME> password [8] <USERPASS>
Syntax
no username
Default No usernames configured
Mode AMF Guest Configuration Mode
Example 1 To assign the user name reception and the password of secret to an AMF guest
node that has the guest class of phone1 use the following commands:
node1#
node1(config)#
node1(config-atmf-guest)#
node1(config-atmf-guest)#
Example 2 To remove a guest node username and password for the user guest class phone1,
use the following commands:
node1#
node1(config)#
node1(config-atmf-guest)#
node1(config-atmf-guest)#
Related show atmf links detail
Commands
atmf guest-class
switchport atmf-guestlink
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
username
Indicates that a user name is to follow
<NAME>
User name of the guest node
password
Indicates that a password (or specifier) is to follow.
8
Specifier indicating that the following password is encrypted. It's
primary purpose is to differentiate between the configuration
input and the CLI input. You should not specify this for CLI input
<USERPASS>
The password to be entered for the guest node.
conf t
amf guest-class phone1
conf t
atmf guest-class phone1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
username reception password secret
end
no username
end
2430