DHCP
IP
6 (DHCP
6) C
FOR
V
V
OMMANDS
6
-
SHOW COUNTER IPV
DHCP
CLIENT
show counter ipv6 dhcp-client
Overview
Use this command in User Exec or Privilege Exec mode to show DHCPv6 client
counter information. See
information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show counter ipv6 dhcp-client
Syntax
Mode
User Exec and Privileged Exec
Example
To display the DHCPv6 client counter information, use the command:
awplus#
Output
Figure 56-2: Example output from the show counter ipv6 dhcp-client
Table 1: Parameters in the output of the show counter ipv6 dhcp-client
C613-50170-01 Rev B
show counter ipv6 dhcp-client
command
awplus#show counter ipv6 dhcp-client
SOLICIT out
ADVERTISE in
REQUEST out
CONFIRM out
RENEW out
REBIND out
REPLY in
RELEASE out
DECLINE out
INFORMATION-REQUEST out ......... 0
command
Parameter
Description
SOLICIT out
Displays the count of SOLICIT messages sent by the DHCPv6
client.
ADVERTISE in
Displays the count of ADVERTISE messages received by the
DHCPv6 client.
REQUEST out
Displays the count of REQUEST messages sent by the DHCPv6
client.
CONFIRM out
Displays the count of CONFIRM messages sent by the DHCPv6
client.
RENEW out
Displays the count of RENEW messages sent by the DHCPv6
client.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show counter ipv6 dhcp-server
......... 20
......... 12
......... 1
......... 0
......... 0
......... 0
......... 0
......... 0
......... 0
for DHCPv6 server
"Getting Started
Guide.
2530