Show Atmf Guests Detail - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF GUESTS DETAIL

show atmf guests detail
Overview This command is available on any AMF master in the network. It displays details
about the AMF guest nodes that exist in the AMF network, such as device type, IP
address, MAC address etc.
show atmf guests detail [<node-name>] [<guest-port>]
Syntax
Mode User Exec/Privileged Exec
Usage If you want to see only the guests attached to a single node, you can use either:
•
•
Note that the parameters that are displayed depend on the guest node's model.
Example To display the AMF guest output, use the command:
awplus#
Output Figure 54-18: Example output from show atmf guests detail
master#show atmf guests detail

ATMF Guest Node Information:

Node Name
Port Name
Ifindex
Guest Description
Device Type
Backup Supported
MAC Address
IP Address
IPv6 Address
HTTP Port
Firmware Version
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<node-name>
The name of the guest node's parent.
<guest-port>
The port name on the parent node.
this command and specify the node name, or
show atmf links guest
nodes and also about their link to their parent node.
show atmf guests detail
: master
: port1.0.9
: 5009
: red-1.0.9
: x600-24Ts
: No
: 0000.cd38.0c4d
: 192.168.1.5
: Not Set
: 0
: 5.4.2-0.1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
detail, which shows information about the guest
2369