Show Atmf Virtual-Links - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
SHOW ATMF VIRTUAL LINKS

show atmf virtual-links

Overview This command displays a summary of all virtual links (L2TP tunnels) currently in the
running configuration.
show atmf virtual-links [macaddr]
Syntax
Mode Privileged Exec
Example 1 To display AMF virtual links, use the command:
node_1#
Table 54-1: Example output from show atmf virtual-links
ATMF Link Remote Information:

Local Local
Port Ip
------------------------------------------------------------------------
vlink1 192.0.2.33
vlink2 192.0.2.65
In the above example, a centrally located switch has the IP address space
192.0.2.x/24. It has two VLANs assigned the subnets 192.0.2.33 and 192.0.2.65
using the prefix /27. Each subnet connects to a virtual link. The first link has the IP
address 192.168.1.1 and has a Local ID of 1. The second has the IP address
192.168.2.1 and has the Local ID of 2.
Example 2 To display AMF virtual links' MAC address information, use the command:
node_1#
Table 54-2: Example output from show atmf virtual-links macaddr
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter
macaddr
show atmf virtual-links
Local Remote
Id Ip
1 192.168.1.1
2 192.168.2.0
show atmf virtual-links macaddr
ATMF Link Remote Information:

ATMF Management Bridge Information:

Bridge: br-atmfmgmt

port no mac addr
1 00:00:cd:27:c2:07
2 8e:c7:ae:81:7e:68
2 00:00:cd:28:bf:e7
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Display the virtual AMF links' MAC addresses.
Remote
Id
2
3
is local?
yes
yes
no
Retries State
0 Down
0 Up
ageing timer
0.00
0.00
0.01
2410