Bridge-Group - Allied Telesis x510-28GTX Command Reference Manual

Stackable gigabit edge switches x510 series
Table of Contents

Advertisement

A
T
M
F
LLIED
ELESIS
ANAGEMENT
-
BRIDGE
GROUP

bridge-group

Overview
Use this command to connect an AMF container to a bridge created on a Virtual
AMF Appliance (VAA) virtual machine. This allows the AMF container to connect to
a physical network.
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and Configuration Guide
multiple tenants on a single VAA host.
Use the no variant of this command to remove a bridge-group from an AMF
container.
Syntax
bridge-group <bridge-id>
no bridge-group
Mode
AMF Container Configuration
Usage
Each container has two virtual interfaces:
1)
2)
Before using this command, a bridge must be created with the same bridge-id on
the VAA host using the bridge <bridge-id> command.
See the
configuring the bridge.
Example
To create a bridge group for AMF container "vac-wlg-1" and , use the commands:
awplus#
awplus(config)#
awplus(config-atmf-container)#
Related
atmf container
Commands
show atmf container
Command
Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
Description
<bridge-id>
The ID of the bridge group to join, a number between 1 and 64.
Interface eth0, used to connect to the AMF controller on the VAA host via an
AMF area-link, and configured using this
Interface eth1, used to connect to the outside world using a bridged L2
network link, and configured using the bridge-group command.
AMF Feature Overview and Configuration Guide
configure terminal
atmf container vac-wlg-1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
for more information on running
area-link
command.
for more information on
bridge-group 1
2314

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents