Atmf Secure-Mode - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF SECURE MODE

atmf secure-mode

Overview Use this command to enable AMF secure mode on an AMF node. AMF secure mode
makes an AMF network more secure by:
•
•
•
•
Once the secure mode command is run on all nodes on an AMF network, the AMF
masters and AMF controllers manage the addition of AMF nodes and AMF areas to
the AMF network.
Use the no variant of this command to disable AMF secure mode on an AMF node.
atmf secure-mode
Syntax
no atmf secure-mode
Default Secure mode is disabled by default.
Mode Global Configuration
Usage When an AMF network is running in AMF secure mode the
feature is automatically enabled. This restricts the
users that are logged on to an AMF master. This feature cannot be disabled
independently of secure mode.
When AMF secure mode is enabled the AMF controllers and masters in the AMF
network form a group of certificate authorities. A node may only join a secure AMF
network once it has been authorized by a master or controller. When enabled, all
devices in the AMF network must be running in secure mode. Unsecured devices
will not be able to join a secure AMF network.
Example To enable AMF secure mode on an AMF node, use the commands:
awplus#
awplus(config)#
To disable AMF secure mode on an AMF node, use the commands:
awplus#
awplus(config)#
Related atmf authorize
Commands
atmf secure-mode certificate expiry
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Adding an authorization mechanism before and AMF member is allowed to
join an AMF network.
The encryption of all AMF packets sent between AMF nodes.
Adding support for user login authentication by RADIUS or TACACS+, and
removing the requirement to have the same privileged user account in the
local user database on all devices in the AMF network.
Adding additional logging which enables network administrators to monitor
attempts to gain unauthorized access to the AMF network.
configure terminal
atmf secure-mode
configure terminal
no atmf secure-mode
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
atmf restricted-login
atmf working-set command to
2299