Ip Dhcp-Relay Server-Address - Allied Telesis x510-28GTX Command Reference Manual

Stackable gigabit edge switches x510 series
Table of Contents

Advertisement

D
H
C
YNAMIC
OST
ONFIGURATION
-
-
IP DHCP
RELAY SERVER
ADDRESS

ip dhcp-relay server-address

Overview
This command adds a DHCP server for the DHCP Relay Agent to forward client
DHCP packets to on a particular interface. You can add up to five DHCP servers on
each device interface that the DHCP Relay Agent is listening on.
The no variant of this command deletes the specified DHCP server from the list of
servers available to the DHCP relay agent.
The no ip dhcp-relay command removes all DHCP relay settings from the
interface.
For DHCP Relay Agent and DHCP Relay Agent Option 82 introductory information,
see the
ip dhcp-relay server-address {<ipv4-address>|<ipv6-address>
Syntax
<server-interface>}
no ip dhcp-relay server-address {<ipv4-address>|<ipv6-address>
<server-interface>}
no ip dhcp-relay
Mode
Interface Configuration for a VLAN interface.
Usage
For a DHCP server with an IPv6 address you must specify the interface for the DHCP
server. See examples below for configuration differences between IPv4 and IPv6
DHCP relay servers.
See also the
device. The
an interface on the device, needed by the DHCP Relay Agent to relay DHCP client
packets to a DHCP server.
C613-50170-01 Rev B
P
(DHCP) C
ROTOCOL
OMMANDS
DHCP Feature Overview and Configuration
Parameter
<ipv4-address>
<ipv6-address>
<server-interface>
service dhcp-relay
ip dhcp-relay server-address
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify the IPv4 address of the DHCP server for DHCP Relay
Agent to forward client DHCP packets to, in dotted decimal
notation. The IPv4 address uses the format A.B.C.D.
Specify the IPv6 address of the DHCPv6 server for DHCPv6
Relay Agent to forward client DHCP packets to, in
hexadecimal notation.
Specify the interface name of the DHCPv6 server. It is only
required for a DHCPv6 server with an IPv6 address.
command to enable the DHCP Relay Agent on your
command defines a relay destination on
Guide.
2458

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents