D
H
C
YNAMIC
OST
ONFIGURATION
-
SHOW IP DHCP
RELAY
show ip dhcp-relay
Overview
This command shows the configuration of the DHCP Relay Agent on each
interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip dhcp-relay [interface <interface-name>]
Mode
User Exec and Privileged Exec
To display the DHCP Relay Agent's configuration on the interface vlan100, use
Example
the command:
awplus#
Output
Figure 55-8: Example output from the show ip dhcp-relay command
Related
ip dhcp-relay agent-option
Commands
ip dhcp-relay agent-option checking
ip dhcp-relay information policy
ip dhcp-relay maxhops
ip dhcp-relay server-address
C613-50170-01 Rev B
P
(DHCP) C
ROTOCOL
OMMANDS
Parameter
<interface-name> Name of a specific interface. This displays the DHCP
show ip dhcp-relay interface vlan100
DHCP Relay Service is enabled
vlan100 is up, line protocol is up
Maximum hop count is 10
Insertion of Relay Agent Option is disabled
Checking of Relay Agent Option is disabled
The Remote Id string for Relay Agent Option is 0000.cd28.074c
Relay information policy is to append new relay agent
information
List of servers :
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
configuration for the specified interface only.
192.168.1.200
"Getting Started
Guide.
2488