Show Atmf Area Guests - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF AREA GUESTS

show atmf area guests
Overview This command will display details of all guests that the controller is aware of.
show atmf area guests [<area-name> [<node-name>]]
Syntax
Default N/A
Mode User Exec/Privileged Exec
Example 1 To display atmf area guest nodes on a controller, use the command,
GuestNode[1]#show atmf area guests
Output Figure 54-8: Example output from the show atmf area guests command
main-building Area Guest Node Information:
Device MAC
Type Address
------------------------------------------------------------------------------
- 0008.5d10.7635
AT-TQ4600 eccd.6df2.da60
- 0800.239e.f1fe
AT-TQ4600 001a.eb3b.dc80

main-building guest node count 4

GuestNode[1]#
Table 9: Parameters in the output from show atmf area guests command
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<area-name>
The area name for guest information
<node-name>
The name of the node that connects to the guests.
Parent
x230
wireless-node1
x230
wireless-node2
Parameter Description
Device Type The device type as read from the guest node.
MAC Address The MAC address of the guest-node
Parent The device that directly connects to the guest-node
Port The port number on the parent node that connects to the guest
node.
IP/IPv6 The IP or IPv6 address of the guest node.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IP/IPv6
Port Address
1.0.3 192.168.5.4
1.0.4 192.168.5.3
1.0.4 192.168.4.8
1.0.7 192.168.4.12
2338