Ipv6 Local Pool - Allied Telesis x510-28GTX Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6
IPV LOCAL POOL

ipv6 local pool

Overview Use this command in Global Configuration mode to configure a local DHCPv6
server prefix delegation pool specifying a poolname and a prefix/prefix length.
You can optionally exclude the locally assigned prefix from the pool with the
exclude-local-prefix keyword.
Use the no variant of this command to remove a local DHCPv6 server prefix
delegation pool specifying the poolname.
ipv6 local pool <DHCPv6-poolname> <delegated-prefix-name>
Syntax
<ipv6-prefix/prefix-length> <assigned-length>
[exclude-local-prefix]
no ipv6 local pool
Default No DHCPv6 server prefix delegation pool is configured by default.
Mode Global Configuration
Usage All IPv6 prefix pool names must be unique. IPv6 prefix pools have a similar function
to IPv4 address pools. Contrary to IPv4, a block of IPv6 addresses (an IPv6 address
prefix) are assigned and not single IPv6 addresses. IPv6 prefix pools are not allowed
to overlap.
C613-50170-01 Rev B
Parameter
<DHCPv6-poolname>
<delegated-prefix-
name>
<ipv6-prefix/prefix-
length>
<assigned-length>
exclude-local-prefix
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Description used to identify this DHCPv6 server
pool. Valid characters are any printable character. If
the name contains spaces then you must enclose it
in "quotation marks".
Description used to identify the delegated prefix
name from the parent PD (Prefix Delegation) server.
If the name contains spaces then you must enclose
it in "quotation marks".
Specify an IPv6 prefix and prefix length. The prefix
length indicates the length of the IPv6 prefix
assigned to the pool.
The IPv6 address uses the format
X:X::X:X/Prefix-Length. The prefix-length is usually
set between 0 and 64.
Specify an IPv6 prefix length assigned to the user
from the pool in the range <1-128>. Note that the
value of the assigned-length parameter entered
cannot be less than or equal to the prefix-length
parameter value entered. An assigned length must
be longer than a prefix length.
Specify this keyword to exclude the locally assigned
prefix from the pool.
2520