Show Counter Ipv6 Dhcp-Server - Allied Telesis x510-28GTX Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6 -
SHOW COUNTER IPV DHCP SERVER

show counter ipv6 dhcp-server

Overview Use this command in User Exec or Privileged Exec mode to show DHCPv6 server
counter information. See
information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show counter ipv6 dhcp-server
Syntax
Mode User Exec and Privileged Exec
Example To display the DHCPv6 server counter information, use the command:
awplus#
Output Figure 56-3: Example output from the show counter ipv6 dhcp-server
Table 2: Parameters in the output of the show counter ipv6 dhcp-server
C613-50170-01 Rev B
show counter ipv6 dhcp-server
command
awplus#show counter ipv6 dhcp-server
SOLICIT in
ADVERTISE out
REQUEST in
CONFIRM in
RENEW in
REBIND in
REPLY out
RELEASE in
DECLINE in
INFORMATION-REQUEST in
command
Parameter Description
SOLICIT in
Displays the count of SOLICIT messages received by the DHCPv6
server.
ADVERTISE out
Displays the count of ADVERTISE messages sent by the DHCPv6
server.
REQUEST in
Displays the count of REQUEST messages received by the
DHCPv6 server.
CONFIRM in
Displays the count of CONFIRM messages received by the
DHCPv6 server.
RENEW in
Displays the count of RENEW messages received by the DHCPv6
server.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show counter ipv6 dhcp-client
......... 20
......... 12
......... 1
......... 0
......... 0
......... 0
......... 0
......... 0
......... 0
......... 0
for DHCPv6 client
"Getting Started
Guide.
2532