Snmp Commands; Introduction; Chapter 58: Snmp Commands - Allied Telesis x510-28GTX Command Reference Manual

58

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
SNMP. For more information, see:
•
•
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B

SNMP Commands

the Support for Allied Telesis Enterprise_MIBs in AlliedWare
information about which MIB objects are supported.
the SNMP Feature Overview and
"debug snmp" on page 2569
"show counter snmp-server" on page 2570
"show debugging snmp" on page 2574
"show running-config
"show snmp-server" on page 2576
"show snmp-server community" on page 2577
"show snmp-server group" on page 2578
"show snmp-server user" on page 2579
"show snmp-server view" on page 2580
"snmp trap link-status" on page 2581
"snmp trap link-status
"snmp-server" on page 2585
"snmp-server community" on page 2587
"snmp-server contact" on page 2588
"snmp-server enable trap" on page 2589
"snmp-server engineID
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Configuration_Guide.
snmp" on page 2575
suppress" on page 2583
local" on page 2592
Plus, for
"Getting Started
Guide.
2567